Description
HAWK BS series thermometer are designed for the sanitary/aseptic applications. The quick process connections including clamp, female thread with coupling nut or male thread enable frequent removal from the process when cleaned in place (CIP) or steamed in place (SIP). It is available in back, bottom, adjustable angle style. It has been designed specially to meet the needs of standard industrial applications.
Our Bimetal thermometers are welded all stainless steel construction and are hermetically sealed. These instruments are leak tested completely to insure the integrity of the joints in the process of producing. HAWK Supplies a wide selection of the available temperature ranges from -50°C to 550°C or equivalent in °F.
Typical Applications
- Beverage, soft drink and fruit juice
- Milk and dairy
- The medicines and cosmetics
- The Edible oil and soy sauce
- Brewery, beer and wine
- Ice cream and yoghurt
- Pharmaceutical and biotechnology industries
- Sterilizing, autoclave cycle and steam flushing
- The confectionary, fishery, froze food and meat processing
Specifications
Operating
The temperature of the case should not be allowed to be exposed to continuous temperature in excess of 200°F (95°C). If silicone filled, the temperature limit is 150°F (65°C). Stem and bulb should not be contact with sustained process temperature exceeding 50% over-ranger or 800°F (425°C).
Immersion
For getting the correct temperature readings, the stem of all models in all ranges must be immersed 2″ deep in liquid, and 4″ deep in gas except for 0/50°C (32/122°F) which require 3″ deep in liquid, and 4″ deep in gas.
Size
3″ (80mm), 4″ (100mm), 5″ (125mm) or 6″ (150mm).
Case&Ring
Stainless Steel 304 (SS316 – Option), polished bayonet ring.
Stem
304 Stainless Steel, 1/4″ diameter-Standard, 3/8″ or others dia available.
Stem Length
2 1/2″, 4″, 6″, 9″, 12″, 15″, 18″, 24″ standard lengths, available in stem lengths up to 72″ long.
Sensing Element
Bimetallic Coil
Dial Face
Aluminum, white background with black graduations and figure, anti-parallax to minimize the reading error available.
Window
Plain Glass – Standard, PC Lens and Tempered Safety Glass – Option.
Several Kinds of Window
Pointer
Anodized aluminum with black finish.
Accuracy
±1.0% of span (Grade A to ASME B40.3)
External Adjustment
External re-calibration screw on back for adjustable angle and back connection.
External re-calibration pointer for bottom connection.
Scale
°C, °F (single or dual scale)
Design Connection
Tri-Clamp, APC, IDF, SMS, Cheer-Tank Spud, DIN11851, Cheer-Burrell I line, RJT (APV).
Size
1/2″ (DN15)………5″ (DN125).
Face
Clamp, Female with Coupling Nut or Male.
Weatherproof
NEMA 4/4X or IP65 enclosure.
